HCP’s CORROSION INHIBITOR is a cooling system additive that has been specifically designed to provide protection, increase longevity and inhibit corrosion. Cooling systems are generally comprised of multiple different metals which are subject to corrosion over time. CORROSION INHIBITOR has therefore been formulated to protect all metals associated with cooling systems (including copper, brass, ferrous metals, aluminium, etc.). CORROSION INHIBITOR is supplied as a concentrate, making it very economical in use.
DIRECTIONS FOR USE: Identify the total water volume required by the cooling system. For best results, add enough CORROSION INHIBITOR to make up 14% of that total water volume. CORROSION INHIBITOR will still provide protection when it makes up as little as 7% total water volume, however any amount less than this is not recommended. In new systems, follow the manufacturers dosage instructions. For older systems, as an added precaution, performing a full flush before adding CORROSION INHIBITOR is recommended to ensure there are no leaks.